SUPAIR
| WILD
| Page 9
glider user's manual
| WILD
PRE-FLIGHT PREPARATION
Unfold the glider and place it on its upper surface in an arc.
Separate the A,B,C risers and the brakes, be certain for the risers and lines not to have any twists or knots or be hooked to a branch,
stone etc...
The WILD is a high level competition glider for Hike & Fly and Cross-Country flying. It is a demanding wing requiring strong piloting
skills from expert pilots.
To discover your new wing, we will advise you to conduct your first small flights in calm conditions on a school training hill or a fami-
liar site you are used to flying with your own harness.
Caution !
It vital to conduct a thorough pre-flight check and have the harness properly connected to the glider prior each takeoff.
Run through the following procedure prior each takeoff:
-
harness or carabiners do not show signs of wear and tear.
-
the reserve parachute container is correctly closed and that the handle is in the correct position
-
your personal settings have not been changed
-
The wing is properly connected to the risers with all links securely tightened and locked in place.
-
The wing is properly connected to the harness without any riser twist.
-
You are securely connected to the harness with the leg and chest strap buckles closed, self-locking carabiners locked.
-
Your are wearing your helmet and it is properly fastened.