Harness User’s manual
S
UP’AIR
_
RADICAL3
Page
13
4. SAFE-T KIT
Mise en place des accessoires
For practical reasons, the RADICAL-3 was designed without a Safety-T strap. If you wish to have one, or have a harness meeting the LTF certification
standard requirements, you must install this kit. It enables one of the leg straps to be permanently closed, hence preventing the risk of taking off in a
unfastened harness.
This kit includes :
- A neoprene sleeve.
- A small strap.
1.
Open the chosen leg strap, and slide
the neoprene sleeve.
2.
Close the leg strap.
3.
Use the strap to lock the buckle :
Insert the strap through the buckle and the guide, then loop it back in, as indicated on the images below.
4.
Slide the neoprene sleeve over the straps and buckle, to secure and protect the assembly.
To strap your harness on, start by entering one leg through the closed leg strap.
Reverse the entire procedure to remove the Safe-T strap.
