Harness User’s manual
S
UP’AIR
_
ALTIR
ANDO
3
_Page
22
Without twisting the risers, connect them to the harness attachment loops using the self-locking carabiners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be located at the front and facing
the flight direction (see diagram).
Lastly, check for the main self-locking carabiners to be fully closed and locked in place.
>> Connecting the wing to the harness.
Connecting the wing to the harness
Install the speedbar/accelerator by following the previous instructions.
Connect it to the wing using the split hooks.
Once the speedbar/accelerator is connected adjust its length according to the wing recommended measurements.
>> Installing the accelerator.
Self-locking
carabiners.
Harness
Flight direction.
« A » risers
left side.
For correct use there must not be any line tension at the
split hook level when the speedbar/accelerator line is
fully relaxed.
