For SLA Battery
Install the battery into the tray and fasten it securely.
Tighten the battery strap as illustrated.
For Lithium Battery
●
Pull the knob (Z) backward and
ha
ve 2 block (X) Insert into slots (Y)
as illustrated direction then push
battery module downward until you
hear “click”, the locking into cam locker.
●
You must check that the battery
module has locked into position.
●
Open the footrest.
●
Fit the seat on to the frame,
insert the seat frame tubes into the
corresponding holes on the main frame.
- 13 –
●
Insert arm rest per the illustration.
●
Tighten the knob.
●
This chair must not be used if the
anti-tip wheels have been removed.
●
insert cable connector B1 into the corresponding hole of joystick.
●
Insert the joystick into the axle of C, the groove S on the axle must
match to pin inside of joystick.
●
Tighten clamp A correctly and be sure that joystick have securely
mounted.
●
Plug the cable connector B2 into the corresponding hole.
●
Push the cable into the cable
locker per arrow illustration.
- 14 -
