SUOMY J 12 F1 Owner'S Manual Download Page 15

ENGLISH

WARRANTY

14

WARRANTY

The guarantee enters into force from  the date of the purchase, which must be
proved by the receipt (invoice, tax receipt or other document unambiguously

proving the date of purchase  issued by the seller of the product).
Any job undertaken in fulfilment of the guarantee does not extend the

guarantee, which remains in any case valid for two years from the date of the
purchase.
The product must not have been modified and / or altered. The presence of

non-original accessories and / or even minimal modifications to the products
invalidates the guarantee immediately and absolves Suomy Spa of all

responsibility.

The guarantee is invalidated when:

?

The product is modified, repainted  or decorated with stickers

?

original components are replaced with non-original parts

Damage deriving from the following are excluded from the guarantee:

?

negligent treatment

?

normal product wear

?

reparations performed by the customer, third parties or other persons not

part of Suomy Spa organisation

?

Using products which are inappropriate and/or in situations other than

those of normal use in accordance with  the procedures described in this

leaflet

TERMS

VALIDITY

Suomy Spa guarantees the product against non-conformities for a period of

two years from the date of purchase and undertakes to repair the product (or
component) or replace it (at the exclusive discretion of Suomy Spa) without
costs for either parts or labour.

Some colours are produced using UV Fluo paints. Those may be subject to
natural migration leading to a reduction in brightness. The phenomenon may
be accentuated when the helmet is exposed for long periods to particularly

bright light.

Should this arise, Suomy declines all responsibility. The phenomenon does

not, however, compromise the performance or quality of J12.

Summary of Contents for J 12 F1
















Reviews: