SUOMY C1JP0001, Instructions For User

Page: 30 / 84

EN
USE AND MAINTENANCE
COMFORT PADDING
The JUMPER internal padding (central padding, right cheek and left cheek pads), can be easily removed to be
washed and/or replaced.
Internal Side Padding: Cheek Pads - removing and inserting.
The cheek pads are attached to the helmet’s inside lining by three press-studs (Pic. 6 A).
INTERNAL SIDE PADDING: CHEEK PADS
The cheek pads are attached to the helmet’s inside lining by three press-studs (Pic. 6 A).
Removal The removable cheek pad is fixed to the internal cap by three press-studs.
For removal, disengage the three press-studs by pulling gently towards the inside of the
helmet (Pic. 6 B).
Insertion To insert the cheek pads match the three press-studs (Pic. 6 A). Make sure of the correct
positioning of the removable cheek pad with a slight pressure, and then press the studs
closed.
Check that the assembly is correct and that:
- The cheek pad is firmly locked in position
- The strap is completely free and has not been trapped under the cheek pad during assembly.
- The rapid system removal tab of the cheek pad is correctly positioned (Pic. 6 C).
The effectiveness of the fastening system depends on the correct locking of the cheek pad, and the correct
positioning of the strap.
02_SUOMYSP_201512_Libretto JUMPER_EN:Layout 1 22-12-2015 10:24 Pagina 30