<In case of full-auto teaching>
Press 'MODE/CANCEL key' to light up MODE indica-
tor/TEACH (yellow). In the state where the sensing objects
are moving on the assembly line, align the beam spot to the
position where the mark on the object passes through.
When setting the output to on for the side with less incident
light intensity, press 'ON/SELECT key', and when setting
the output to on for the side with more incident light intensi-
ty, press 'OFF/ENTER key' for more than 2 seconds. '
˴˴
'
is displayed, and sampling begins.
COLOR
or
COLOR
COLOR
COLOR
13
COLOR
٨
PRO MODE
The setting for whether PRO is used or not can
be done when MODE indicator/PRO
˴
(yellow)
lights up. For confirming each selected setting
item, press 'OFF/ENTER key'. After confirming
setting, the digital display flashes.
For canceling setting, press 'MODE/CANCEL key'.
Set full key lock.
Set key lock except
for RUN adjust mode.
(RUN adjust)
Set key lock except
for RUN teaching mode.
(RUN teaching)
Mark mode setting: Displays incident light intesity
Color mode setting: Displays color coincidence
Mark mode setting: Displays relative value (percentage)
Color mode setting: Displays color coincidence
(
(
Key lock
setting
Display
setting
Eco
setting
Reset
setting
Display inverting
mode setting
(
(
Sensing level: Fine
Sensing
setting
(
(
Sensing level: Coarse
(
(
Eco setting: OFF
Eco setting: ON
Invert t h e d i s p l a y .
Not invert t h e d i s p l a y
Not reset the settings.
Reset the settings.(After resetting, the sensor goes back to RUN.)
(
(
(
(
Display inverting mode setting
Reset setting
Sets the sensing level (hysteresis).
Sets timer setting period by 9-steps.
Selects key lock function.
Selects display method of digital desplay.
Sets ON/OFF of eco mode.
Changes display direction of digital display.
Resets to factory setting.
Eco setting
Key lock setting
Display setting
Timer setting function
Sensing setting
Description
Function
SELECT
ON
Press
ENTER
OFF
Press
SELECT
ON
Press
SELECT
ON
Press
SELECT
ON
Press
ENTER
OFF
Press
(Conf.)
SELECT
ON
Press
SELECT
ON
Press
SELECT
ON
Press
SELECT
ON
Press
SELECT
ON
Press
SELECT
ON
Press
Timer
setting
(
SELECT
Press
to change the timer period.
ON
(5ms)
(2ms)
(1ms)
(10ms)
(50ms)
(500ms)
(100ms)
(200ms)
(20ms)
(
ENTER
OFF
Press
ENTER
OFF
Press
(Conf.)
ENTER
OFF
Press
(Conf.)
ENTER
OFF
Press
ENTER
OFF
Press
(Conf.)
ENTER
OFF
Press
SELECT
ON
Press
ENTER
OFF
Press
(Conf.)
ENTER
OFF
Press
SELECT
ON
Press
ENTER
OFF
Press
(Conf.)
ENTER
OFF
Press
SELECT
ON
Press
SELECT
ON
Press
ENTER
OFF
Press
(Conf.)
ENTER
OFF
Press
SELECT
ON
Press
SELECT
ON
Press
'
' is displayed on the
digital display.
'
' is displayed on the
digital
display.
Slow
down the speed of the
assembly line, and carry
out the teaching again.
In case stable sensing is possible
:
In case stable sensing is impossible:
Note: If the output is gained on the opposite side against the side desired to the step
,
carry out the teaching again. In this case, note that, when carrying out the teaching
for this measurement, press the different key from the one previously pressed.
Besides, since the output 2 (invertion output) is incorporated in the cable type
LX-101
غ
, the output can be inverted. Refer to '
˴
OUTPUT 2 (INVERSION
OUTPUT) (OUT) (For LX-101
غ
type only)' for the details.
15
This function is to turn off the digital
display in RUN state.
(
(
Press 'MODE/CANCEL key' to confirm.
The numerical value indicated in the digital display should be used as a reference.
Notes: 1)
2)
<Time chart>
ON
OFF
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
Beam-
received
Beam-
interrupted
Timer period: T=1 to 500ms 9-step variable
Sensing
condition
Timer operation
Operation
Light-ON/coincident ON
Without timer
OFF-delay timer
ON-delay timer
Dark-ON/incoincident ON
Light-ON/coincident ON
Dark-ON/incoincident ON
Light-ON/coincident ON
Dark-ON/incoincident ON
TIMER OPERATION SETTING MODE
12
COLOR
13
Press 'MODE/CANCEL key' to confirm.
Note:
The setting for whether the timer is
used or not can be done when MODE
indicator/TIMER (yellow) lights up.
The initial value of each timer function
is 20ms.
Refer to '
PRO MODE' for the setting
delay timer, OFF-delay timer and ON-
delay timer
(OFF-delay)
(Without timer)
(ON-delay)
SELECT
ON
SELECT
ON
SELECT
ON
ENTER
OFF
ENTER
OFF
In case of color mode
<In case of 1-level teaching>
Press 'MODE/CANCEL key' to light up MODE indica-
tor/TEACH (yellow).
When setting the output to ON with mark, press 'ON/SELECT
key', and when setting the output to OFF, press 'OFF/ENTER
key'. '
' blinks.
or
COLOR
COLOR
COLOR
ADJUST MODE
The following settings can be done when MODE
indicator/ADJ (yellow) lights up.
11
The judging tolerance setting is the function that can change the judging
tolerance with respect to the taught reference color.
Even if the tolerance is changed, the information of the reference
color taught earlier does not change.
The judging tolerance value increases with 'ON/SELECT key', and
decreases with 'OFF/ENTER key'.
In case of color mode: Set judging tolerance
The threshold value is fine adjustable using 'ON/SELECT key' or
'OFF/ENTER key'.
In case of mark mode: Fine adjustment of threshold value
'
' is displayed on the
digital display.
'
' is displayed on the
digital display, and the set-
ting value is reset to the
pre-teaching value.
In case stable sensing is possible
:
In case stable sensing is impossible:
COLOR
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
