05. Prepare Your Sunway Multi-Function Cooking Machine
1/Proper Placing of the Mug
Make sure the blade is properly placed in the stainless steel mug, as shown in Figure 1.
2/ Place the mixing mug on the machine body properly, as shown in the figure (be careful not to close the lid).
3/ Press the mug down, and make sure the blade drive shaft at the bottom of the mug fits into the drive cover in the main body, as shown
in Figure 2.
Warning
If the mixing mug is not installed in place, the lid will not buckle.
3/Install the lid. As shown in Figure 3, put the lid diagonally on the mixing mug, then press down the lid and rotate it clockwise, so that
the buckle on the lid slides properly into the buckle next to the top cover of the machine and then rotates to the center position.
4/When the lid is in place, there will be a click and the buckle at the back edge of the lid will coincide with the handle of the mixing
mug, as shown in Figure 4.
Warning
Sunway
cooking machine has a safety switch between the lid and the machine body. If the lid is not closed, the machine will not work
well.
Note that the cooked food has a risk of scalding. Avoid forcibly opening of the lid when the cooking is just finished for fear of injury
caused by food spillage due to excessive internal pressure.
Wait a while before opening the lid. After the food in the mug is no longer boiling, open the lid and the measuring cup, and slowly
remove the lid counterclockwise to avoid being scalded by the overheated food in the opening process.
