Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 85
3.9.4 Signaling Capture
Figure 3-96 Signaling Capture Interface
See Figure 3-96 for the Signaling Capture interface, including two parts: Packet Capture and Data
Recording. Packet capture contains Signaling Packet Capture and RTP Packet Capture. You can
select either of them to start the capture according to your requirement. Click
Start
to start
capturing packets. Click
Stop
to stop the capture and download the captured packets.
Data Recording will execute the recording task on the set port with the set recording time length.
Click
Start
to start recording data (consecutively recording 300 seconds at most) on the
corresponding port with the corresponding time length. Click
Stop
to stop the recording and click
Download File
to download the recorded data.
Note:
Parsing the recording file requires the help of tools. Click
Download Tool
to download the
parsing tool you need.
3.9.5 Call Log
