Sunway SMG Series, User Manual

Page: 42 / 102

Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 37
Duration Error at
ON/OFF State
The accepted maximum error at on/off state. Range of value: 0~100, calculated by
%, with the default value of 20.
After configuration, click Save to save the above settings into the gateway or click Close to cancel
the settings. If a dialog box pops up after you save your settings asking you to restart the service,
do it immediately to apply the changes. Refer to
3.9.14 Restart for detailed instructions.
Click Modify in Figure 3-31 to modify the tone parameter. See Figure 3-33 for the tone parameter
modification interface. The configuration items on this interface are the same as those on the Add
New Tone Parameter interface.
Figure 3-33 Modify Tone Parameter
To delete a piece of tone, check the checkbox before the corresponding index in Figure 3-31 and
click the ‘
Delete ’ button. Check All means to select all available items on the current page;
Uncheck All means to cancel all selections on the current page; Inverse means to uncheck the
selected items and check the unselected. To clear all tone at a time, click the Clear All button in
Figure 3-31.