4
17
Power /
work instructions
The indictor light will on when energized or working.
Recorder Installment
1. Insert a memory card: Please insert the memory card correctly
according to the instructing direction of the slot, press the card until a
click is heard.
Since the recording speed is fairly high, the card must be high-speed card
(CLASS6 above).
Note: For new card, please format the card with the machine.
2, Remove the memory card: Press the memory card, pop up the slot.
Note: Please don’t remove or insert a memory card in boot state, to
avoid damaging the memory card.
Mounted on the windshield in front of the car rearview mirror.
(1) Mounted the device on sucker with holder, tighten the holder and
base of sucker, ensuring that the camera is level with the ground, and
confirm that the device firmly locked in place.
(2) Put the sucker flat, and fix it on the windshield.
(3) Place the sucker firmly on the windshield, press the clip, and fix it on
the windshield in front of the mirror. Make sure that the device locked
in place!
Connect to the power supply
Please use the original factory standard charger to start the device and
charge for the built-in battery. Connect one side of the car charger with
the USB port, connect another side to car port, the Recorder will on once
