9
LEARNING THE DEVICE CODES.
This function allows Remote Control to learn original remote control codes. Once these codes are learnt, all devices can be
controlled centrally from one single source.
1. Press
for 2 seconds to enter setup Menu.
2. Select
the
„Code Setting“
menu and confirm pressing the
key.
3. Select
the
„ Learning“
key and confirm pressing the
key to enter the sub-menu. You will see the Help Guide
for the learning function. Re-confirm pressing the
key after reading all learning steps.
4.
Select the menu of the device whose functions you want Remote Control to learn. Before entering this menu you will be
guided through the menu of learning SRC-7000 rubber keys. Skip this menu by activating the „continue...
“ key.
For the device to learn, point your original remote to the
„Learning Eye“
(located at the bottom of the SRC-7000) at a
distance of approx. 5-10 cm (see picture on the right). The display shows the key that is learning a specific function
in black.
LEARNING THE DEVICE CODES.
Setup
Enter
STOP
PLAY
MENU
CH+
VOL+
VOL-
CH-
MENU
M
i
Setup
Enter
STOP
PLAY
MENU
CH+
VOL+
VOL-
CH-
Learning Eye
5-10 cm
original remote
SRC-7000
5
4
3
1
2
