3rd
Ⅲ
. Installation Steps
TX
The right step to turn on the system:
1. Install the antenna of the transmitter
2. Connect the camera with the transmitter
3. Buckle the lithium battery
4. Switch on the power s
Now the transmitter is in working state.
RX
1. Install the two pieces antenna
2. Connect transmitter with Monitor by AV cable
3. Connect to power
4. Turn on power
Now the receiver is in working state
Ⅴ
. Adjust the Parameters
Steps:
1. Connect the antenna of TX
2.Turn on Power of TX
3. Modify the parameters of TX(not turn off the power then go on to modify the RX)
4. Connect the antenna and monitor display with of RX
5. Turn the power of RX
6. Modify the parameters of RX
After the successful parameters modification, the RX will research the TX signal automatically
Summary of Contents for ST6200TPS-SD
Page 2: ...2nd II Instructions TX RX...