14th
TX Power(Default: 29dbm)
This setting establishes the transmit power level which
will be presented to the antenna connector of the
TDD_COFDM. Unless required, the Tx Power should not
be set into maximum, but rather for the minimum value
required to maintain an adequate system fade margin.
7.2.3. RS1 Configuration
In this section, you can modify two parameters listed in the following
picture: Data Baud Rate and Data Format
Data Baud Rate(Default: 115200)
The serial baud rate is the rate at which modem is to communicate with the
attached local asynchronous device.
