7
A
B
X
A
POPIS VÝROBKU
i
The heating panel is designed to heat or maintain residential, commercial or industrial areas. The front side of the
heating panel has been treated with a surface coating. The surface of the heating panel is smooth or sandblasted
depending on the panel type. It is a Class II appliance with IP 20 powered with 230V/50Hz. The product is equipped
with a thermostat to prevent overheating.
The product is designed to be installed on a wall. Plugging into the electrical mains is typically done by means of
a connecting cable ended with a sheathed male plug. Another option is to plug the inlet box at the back side of the
panel into the electrical mains.
The panel comes with a standard installation set for the brickwork. Make sure the anchoring material is suitable for
the chosen material, or if need be consult with the anchoring material supplier. The heating panel may be installed
on surfaces with Class A1, A2, B, C or D fire resistance rating. The dimensions and input power of the models are
listed in the table below.
PRODUCT DESCRIPTION
i
TYPE
POWER (W)
A (mm)
B (mm)
X (mm)
SUNTHERM NG+ 80
80
440
260
425
SUNTHERM NG+ 150
150
840
260
825
SUNTHERM NG+ 200
200
540
540
525
SUNTHERM NG+ 200dl
200
840
390
825
SUNTHERM NG+ 300
300
640
640
625
SUNTHERM NG+ 400
400
900
540
875
SUNTHERM NG+ 500
500
980
640
965
SUNTHERM NG+ 500dl
500
1040
540
1025
SUNTHERM NG+ 600
600
1240
540
1225
SUNTHERM NG+ 700
700
1240
640
1225
