SunTech ST4315 User Manual Download Page 24

Page: 24 / 30

ST4315 User Manual

[response] ST4315CMD;Res;850000;010;ReqIMSI;724031111553779

4-11-10. Request ICCID

● Definition

: Request the ICCID.

Field

Definitions

Unit

Remark

CMD_ID

“ReqICCID”

Request ICCID (sequence number that is displayed on SIM)
If received, device sends ICCID of using SIM.

<example>

[command] ST4315CMD;850000;02;ReqICCID
[response] ST4315CMD;Res;850000;010;ReqICCID;89550230000084256668

4-11-11. ReqVer

● Definition

: Request software version.

Field

Definitions

Unit

Remark

CMD_ID

“ReqVer”

Request device version
Device reports Model, Buyer, Protocol and S/W release
version.

<example>

[command] ST4315CMD;850000;02;ReqVer
[response] ST4315CMD;Res;850000;010;ReqVer;ST4315E_SAMPLE_STBASE_001

4-11-12. Erase All

● Definition

: Erase all of data in buffer.

Field

Definitions

Unit

Remark

CMD_ID

“EraseAll”

Erase saved all reports and disable outputs.
This is needed to initialize just before device is delivered to
a customer.

<example>

[command] ST4315CMD;850000;02;EraseAll

Summary of Contents for ST4315































Search results

Summary of Contents for ST4315

Reviews:

Related manuals for ST4315

Brands by name

Popular brands

SunTech ST4315, User Manual

Search results

Summary of Contents for ST4315

Reviews:

Related manuals for ST4315

Brands by name

Popular brands