18
Charger and charging
Precaution for use and handling charger
Use only the charger originally supplied with your new eFOLDi or replacement charger
supplied by SunTech UK Ltd for the use with the eFOLDi. The use of a non-approved charger
will invalidate any warranty and may cause serious damage to the battery and/or your eFOLDi.
The charger should not be used with or for other devices as damage caused to the charger
and/or any other device by doing so will not be covered by our warranty.
It is highly recommended to ensure the charger is placed only on a heat resistant surfaces
and nothing, which could contribute to a fire (e.g. carpet, floorboards,wood, laminate or plastic
worktops and so on)- the charger will heat up during a normal charging cycle, as will the
battery.
Do not leave the battery on charge for more than 24 hours as this will reduce the life and
performance of the battery.
For the benefit of international travellers, your approved eFOLDi charger can be used with any
mains voltage supply from 100 to 240 Volts, with a suitable travel adaptor.
Charging notes for international travellers.
*Before obtaining an alternative cable, it is recommended you examine your eFOLDi charger to
determine which type of plug it requires - it will be either a two -pin ‘figure of 8’
(IEC60320-1 C7), or a three-pin similar to a kettle (IEC60320-1 C13).
After the easy removal of the battery it can be charged up, plugging in the socket.
The eFOLDi Lite will charge up in 5 hours and last for 14 miles/22 km of travel distance.
Using the charger
Summary of Contents for eFOLDi Lite
Page 1: ...1 eFOLDi Lite USER MANUAL ...
Page 7: ...5 ...
