Suntec Wellness ZIP-8441 pro, Instruction Manual

Page: 8 / 39

•
Refrain from further usage if the power cord or
appliance are damaged and contact your seller.
•
Do not attempt to repair, disassemble or change the
appliance by yourself.
•
The usage of accessories not provided by SUNTEC
may cause harm.
Installation
Operation
Before first use:
Please remove the device from the carton packaging and remove all other packaging materials.
Please inspect the unit for visible defects. Do not operate the unit if it is damaged and contact your dealer
immediately.
Please clean the unit before using it for the first time. Please read the chapter "Cleaning".
•
Please place the unit on a stable flat surface.
•
Please place the juice container on the rotation axis.
•
If you want to collect the juice in the juice container, leave the spout on the juice container at the top. If
you want to pour the juice directly into a glass or other container, press the spout down. The spout
should engage audibly.
•
Please place the strainer into the juice container.
•
Please select a juicing cone suitable for your fruit. Please separate the big one from the small press
cones, by pulling off the big push cone from the small one.
The large press cone is suitable for the juice extraction of fruit, e.g. Grapefruits and oranges. The small
press cone is again suitable for smaller citrus fruits, e.g. Lemons and limes. If you want to use the large
press cone, it must be fixed on the small press cone. After the selection, please place the selected
press cones on the sieve insert.
•
Please place a suitable container or glass in front of the spout.
•
Make sure that the specified mains voltage (220-240V ~, 50 / 60Hz, 160W) is the same as the power
supply.
•
Please connect the mains plug of the device to the socket.
•
Cut your citrus fruit unpeeled into two halves.
•
Please place a half of the fruit on the press cone. Please pull the lever downwards and press gently on
the fruit half. The appliance automatically switches on as soon as the fruit is pressed onto the press
cone. The fruit is then juiced by rotating the press cone. Possible kernels and thick pieces of fruit meat
Large juicing cone
Small juicing cone
Strainer
Juice container with spout
Rotation axis
Main body
Lever