17
Cleaning
Cleaning the appliance at least once a week (2 Steps).
Step I:
1. Remove the water tank.
2. The base may be cleaned with mild soap and warm water, brush the shake
implement and etc slightly.
Step II - Sterilization (base and water tank)
Mix 1 teaspoon of bleaching agent with 5 liters of water, leave for 20 minutes, shake
the water tank for every few seconds.
Attention: Do not scrub the appliance surface of the base or the tank as this will leave
permanent scratches.
Change the ultrasonic transducer chip
The ultrasonic transducer chip is the main component to produce the mist. When
operating by using hard water, there will be mineral deposition on the transducer chip.
Even when the product is equipped with an water filter the chip has to be cleaned
periodically. When mineral deposition is too serious, which affected the operation of
the device, the transducer chip should be changed. One spare pack of the transducer
chip is included in this package. To change the chip, first turn off the power and
remove the plug from the main supply, and then remove the water tank, empty the
water in the base, dry the base with a soft dry cloth. Use the tool provided in the spare
pack to remove the malfunction chip, and then replace it by the spare one. The white
side of the chip should be facing out. Use the tool to screw the cover tightly.
Product drawing
红外线接收头
显示屏
底座
电气板
负离子发射头
M
RELATIVE HUMIDITY
EMPTY
WARM MIST
0
IONIZER
TIMER
I
S
T
/
0
HRS
开关板
喷嘴
水箱
Nozzle
Water Tank
Control Panel
Remote receiver
Ionizer
Control Panel button
Colour screen display
Base
