SAFETY INFORMATION
1.
Please read the operating instructions carefully before using your dehumidifier for the first time and keep them in a safe
place.
2.
Never immerse the appliance in water or other liquids.
3.
Never operate the appliance if a cable or connector has been damaged, after appliance malfunction or if the appliance
was dropped or otherwise damaged.
4.
Electric appliance may only be repaired by qualified personal, improper repair work can be a source of considerable
danger for the users.
5.
Children are not aware of the hazards of electric appliance. Therefore, never allow children to manipulate electric
appliance unless properly supervised.
6.
Disconnect the appliance from mains power whenever it is not in use, before relocating it, and before cleaning,
7.
Operate the appliance only at the voltage specified on the type plate.
8.
Use the appliance only in the household, and only for the purpose it was designed for.
9.
Do not place heavy objects on the appliance.
10.
To prevent spillage, empty the water tank before relocating the appliance.
11.
Do not tip the appliance to any side as escaping water could damage the appliance.
12.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
13. When the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
14. The devices should be installed at minimum distant of 50CM from the wall or other obstacle.
15. Unplug the appliance before cleaning.
OPERATION INSTRUCTIONS
1.
Control panel
2.
Air outlet
3.
Handle
4.
Front panel
5.
Back panel
6.
Water out hole
7.
Water tank
CONTROL PLATE DESCRIPTION
OPERATION INSTRUCTIONS
Starting the unit
1. Firstly, turn the humidity control switch to the “OFF” position.
2. Plug in the dehumidifier.
3. Turn on the humidity control switch (to right side) and turn the same switch to the reading of the desired humidity (60% in
general as shown on position ”4”).
