14
How to use
1. Your air purifier is designed for easy use and maintenance. Make sure that the
UV bulb, HEPA and activated carbon filter, Tio2 filter are properly installed
before use.
2. Select the proper location with a flat, stable surface. Do not place on or near
heat sources such as stoves, radiators or heaters, or in direct sunlight.
3. Plug in the Air Purifier (note: always unplug the air purifier before moving or
servicing the unit).
4. Press “POWER” to switch the unit on or off, when the unit starts, the fan speed
is tolerated as “L” (low) class.
5. Press the “SPEED” button to choose fan speed (L – Low, M – Mid, H – High).
6. Press the "TIMER" button to set time 2, 4, 8 hours can be set to control its
timed stop effects (which is expressed by the LED light).
Maintenance – important:
●
For quick air cleaning, please set the speed control to the High-speed setting.
After about 30 minutes, set the speed control to lower speed setting.
●
To maintain fresh air in your room all the time, it’s good for you to set the speed
control in Low-speed setting;
●
For nighttime use, please set the speed control to the low-speed control setting
for quiet air cleaning
How to Clean and replace
Wipe the enclosure, control panel, and cord with a damp cloth or sponge.
The intake grille can be removed and washed in warm, soapy water. Do not place
in dishwasher. Make sure the grille is completely dry before reinstalling.
The outlet grille should simply be dusted. It should not be immersed in water.
No part of the air purifier should be placed in dishwasher.
Timely replace HEPA filter while its color becomes black. Discard the used filter, it
cannot be cleaned.
After using for some time, in order to remove the dust from the anion outlet use a
dry brush (only under conditions of power supply disconnection).
To keep the cleaning effect of your air purifier, clean the anion outlet with a
sanitary dry cloth (pure air outlet) frequently, while doing so, please disconnect the
power supply.
Troubleshooting Guide
Warning: To reduce risk of electric shock
⇒
Always unplug before cleaning
⇒
Do not immerse in water or other liquid.
