Troubleshooting iDevices and incompatible messages
If the iDevice (iPhone, iPad, etc) shows an incompatibility message, it basically translates to it needing more
power. These messages will not, in any way, harm your iPhone. It is an indication the sCharger-5 is not
outputting the full energy needed to activate the iDevices’s internal charger. Make sure the sCharger-5 is in the
sun. After you plug your iDevice into the
s
Charger-5
and you see the charge icon activate then you are charging.
If not, then unplug the phone and plug it back in while the
s
Charger-5
is in the sun then let the sCharger-5
do its
job. For battery status verification, take a note of the percentage charged(*see note below) then come back in
ten minutes and verify how much it increased.
*
Go to Settings->General->Usage then turn Battery Percentage “ON”. If this option is unavailable, then your
iPhone needs an IOS update.
Specifications
Connector Type
USB Type “A”
Output Voltage (USB)
5.0V
Output Current (USB)
0.8A – 1.2A (800-1200mA)
Output Power
5-6 watts
Temperature
Tested to 160F/ 71C
Indicator
Bright LED
Dimensions (open)
6-1/8” x 11.5” / 15.5 x 29.2 cm
Dimensions (closed)
6-1/8” x 5-3/4” / 15.5 x 14.6 cm
Weight
8-8.5 oz / 200-240 g
Weather and corrosion resistant
8