Website: www.sunsynk.com E-mail: [email protected]
16
1.
Put wire through isolation cap and Tail-
Hood.
2.
Swipe outer isolation layer of DC cable.
3.
The is used for the positive, and the negative for the
black contact. The end of the cable is bunched at the
terminal using a wire clamp.
4.
Tighten the isolation cap and plug contact.
5.
Put the positive and negative plug on to the system and tighten it.
6.
Use isolation cap for unused DC plug.
3.3. DC Cable Connection
3.3.1 Single Unit
Figure 5 - Single unit connection