© by WilTec Wildanger Technik GmbH
Seite 25
http://www.wiltec.de
http://www.aoyue.eu
http://www.teichtip.de
Version 6. 2017
•
If the cable or the plug is damaged due to external influences the cable must not be re-
paired! It has to be replaced with a new one. This work can be carried out only by an elec-
trician.
•
The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to
correspond to the existent mains voltage.
•
Never lift, carry or fixate the device by using the power cable.
•
Make sure that the electrical plug connection is placed in a flood-proof area and is protect-
ed from moisture.
•
Before working on the pond pump disconnect the appliance by taking the plug out of the
socket.
•
Avoid exposing the appliance to a direct water jet or rain.
•
The user is responsible for the compliance with location specific safety and installing regu-
lations. (Ask an electrician).
•
Consequential damage arising from flooded rooms caused by dysfunctions of the appliance
must be avoided by means of the appropriate measures. (installing an alarm system, reser-
ve pump).
•
In case of malfunction the repair work can be carried out only by a qualified electricial or the
WilTec-service.
•
The appliance must not run dry or with a completely closed intake port. The manufacturer’s
guarantee is no longer valid if the damage is caused by dry running.
•
The appliance must not be used for swimming pools.
•
The device cannot be employed for potable water circuits.
WARNING:
Read carefully all the safety guidelines and the instructions.
Non-compliance with the safety rules and regulations can lead to an electric shock, fire and/or se-
rious injury. Keep the instructions and the safety guidelines in a safe place in case you need them
in the future.
Stability
The max. temperature of the conveyed liquid should not 35°C in permanent operation.
The conveyance of aggressive fluids (acids, bases, etc.) as well as of abrasive substances (for
example sand) must be avoided.
Electrical connection
•
The electrical connection takes place via an electric safety socket 230 V ~ 50 Hz. Fuse protec-
tion at least 6 Amperes.
•
The engine is protected against overloading or blocking by means of a built-in motor protection.
In case of overheating the pump is turned off automatically due to the overheat protection and
after the cooling the pump is automatically started.
Power connection
The pond pump is equipped with a safety plug. The device is designed for connection to an isolat-
ed ground receptacle with 230 V~50 Hz. Make sure that the socket outlet is sufficiently fused (at
least 6A) and safe. Insert the plug in the socket outlet and the pond pump is ready for use.