WARNING:
Read all safety instructions!
Failure concerning the warnings and instructions may result in electric shock, fire and/or serious injury.
Keep all warnings and instructions for the future.
Resistance
As for the continuous operation, the maximum temperature of the liquid to be transported
should not 35
.
℃
This pump must not be used to transport any combustible, gasing or explosive liquids.
Electrical connection
The electrical connection is made to a grounded socket 230 V ~ 50 Hz protection at least
10 A.
The device is switched on and off by using the built-in ON / OFF switch. When the engine is
turned on, the control lamp in the interior of the switch lights up.
The engine is protected against overloading or blocking by a built-in thermal protection. In
case of overheating, the pump is switched off automatically by the protection. After cooling
down, the pump re-switches on automatically.
Mains connection
Your pond pump is already equipped with a grounded plug. The pump is meant to be for a connection
to a grounded socket with 230 V ~ 50 Hz. Make sure that the socket is sufficiently secured (at least
6 A) and in a good condition. Run the pump plug into the socket. The pump is ready for operation.
Never operate the pump if the cord or the plug is damaged. Please make sure that the connection to
the power source is installed in a way that prevents water to flow along the cable to the direction of the
power plug direction. The installation should be similar to the below mentioned picture. The upward
arc prevents that water drops from getting into the socket.
Technical data
Model
Item №
Tension
(V)
Power con-
sumption
(W)
Delivery
head
(m)
Pump per-
formance
(ℓ/h)
Weight
(kg)
CHJ-502
50325
230
6
0.9
500
0.3
CHJ-602
50326
230
8
1.3
600
0.44
CHJ-902
50327
230
16
1.5
900
0.6
© by WilTec Wildanger Technik GmbH
Item 50325–50327
Page 4
http://www.WilTec.de
http://www.aoyue.eu
01 2021
-1