Cleaning and maintenance
1. Clean the pump and the filter basket weekly, and also when the flow is lower than usually.
2. Disconnect the pump from the electrical circuit.
3. Unscrew the press nut (Pic. 1), press the buckle to take the basket out (Pic. 2) and also pull
out the sponge (Pic. 3).
4. Press the buckle to take off the big filter basket and the bottom (Pic. 4 and 5).
5. Clean the baskets, the pump and the sponge with a soft brush under floating water.
6. Turn the pump body according to Pic. 7 , then take it out
7. Clean the impeller and make sure that the O-Ring is in a right position (Pic. 8 and 9).
Overwintering
1.
Take the pump out of the water and disconnect it
2. Clean the pump as described above.
3. Make sure that there is no damaged part, like a cracked housing.
4. Store the Pump under frost-free conditions in a bucket or container of water (if possible).
CAUTION: Never immerse the connection plug!
© by WilTec Wildanger Technik GmbH
Item 50328–50336
Page 6
http://www.WilTec.de
http://www.aoyue.eu
11 2020
-1
