SunSun 50312, Operation Manual, Page: 7 / 8

© by WilTec Wildanger Technik GmbH Item 50312
–50317
Page 7
http://www.WilTec.de
http://www.aoyue.eu 09 2021 -1
http://www.teichtip.de
1. Disconnect the pump from the electricity supply before carrying out any maintenance work.
2. Unscrew the top piece (Fig. 1).
3. Turn the filter basket by 90° (Fig. 2) to remove it.
4. Slide the blue lock to
“Open” to unlock the motor housing.
5. Turn the motor housing by 90° (Fig. 4) to remove it.
6. Remove the rotor to clean it (Fig. 5).
7. To clean the individual parts, use a soft brush or a sponge and clean them under running water.
8. Check the correct seat of the O-ring before re-assembling the pump.
Winter storage
1. Take the pump out of the water and disconnect it from the power supply.
2. Clean the pump as described in the instructions.
3. Check the pump for damage such as cracks in the housing.
4. Store the pump under frost-free condition and, if possible, in a container with water.
ATTENTION: The plug must not get into the water.