GRILL START-UP – LIGHTING THE GRILL
PAGE 14
REMOVE COVER & OPEN VENT
1. Ensure Grill Control Knobs
are In the OFF position, turn
either KNOB to High Position.
2. Light the Main Burners by turning
either one KNOB counter-clockwise to
HIGH
Push in and SLOWLY turn. Allow
Gas to Completely Fill the IR Burner
chamber.
3. You will hear a loud click as the
electronic lighter produces a spark.
Listen for the sound of the gas igniting
and look for a flame through the cooking
grids. If the burner does not light on the
first try, repeat immediately.
5. If the burner does not light in 5
seconds then wait five minutes until
the gas clears before attempting to
light it again. Repeat the procedure
or try the manual lighting options on
6. Upon successful lighting, repeat the
process on the other burner.
7. To shut off the burners, rotate the
knob and turn to OFF.
8. It is normal to hear a popping sound
when the burners are turned off.
REMOVE COVER WHEN
LIGHTING THE GRILL & OPEN
BACK VENT PANEL
4. The Gas must completely fill the
entire IR-Burner so repeat this until IR
Burner lights all the way across and
stays lit.