SUNSTONE Orion 50p, User Manual, Page: 10 / 21

50p User Manual
10
Area between brass post holder block and the body of the weld
head will be exposed for short periods of time during a weld . The
post holder block will drop down and go back up very quickly, so
avoid putting hands and extremities near this area of equipment
when operating .
ELECTRIC SHOCK
There is a potential between the positive and negative terminals
of the weld head of up to 170VDC during the welding process .
Note that unlike other similar welders, voltage is only live after
the trigger is initiated by either the foot pedal or double button .
We suggest using our double button switch system in order to
avoid any potential electrical shock . Never touch both of these
areas with exposed skin, while triggering a weld . If you want to be
able to hold the workpiece, we suggest using isolated gloves or
tools that are not conductive .
TIPPING OVER:
This unit may be top heavy and can tip over . In order to prevent
this we suggest that you mount it to a table or fixture .