Sunstone Power Industrial GmbH
PT. Solid Power Energi Indonesia
Sunstone Power Industry Co., Ltd.
Room 5755, Adam-Opel-Straße 7-11
Komplek Duta Indah Iconic, Blok. C No. 2 Jl.
Room 1803A, Tiley Central Plaza. Shenzhen, China
60386 Frankfurt (M), Germany
MH Thamrin KM.2 Kebon Nanas, Tangerang 15143 INDONESIA
www.sunstonepwer.com
5. Daily use and maintenance of battery pack
5.1 Daily maintenance of battery pack
1. Check the voltage data on the BMS display and the actual battery voltage value to ensure the
accuracy of the voltage collection of the BMS. If they are inconsistent, proofreading is required. The
error between the collected voltage and the actual battery voltage does not exceed 10mV
.
2. Check the temperature collection data and actual temperature value of the BMS, and the data
error between the collected data and the actual temperature value is not allowed to exceed 3
℃
, to
ensure that the battery will not be charged or discharged when the temperature is too high or too
low.
3. Check the BMS current collected data and actual current value, the error is not allowed to exceed
1%, to ensure that the battery will not be charged or discharged by overcurrent.
4. Check the reliability of the charging equipment to ensure that the charging equipment performs
charging according to the voltage and current regulationsent by the BMS, to ensure that the battery
will not be overcharged
.
5. Check the connection of the battery pack is good, the contact points are in normal contact, and
there is no accumulation of dust, powder, metal chips.
5.2 Caution
1. Keep batteries or battery packs away from dangerous items or materials, such as corrosive chemi-
cals, dangerous machinery and equipment, and high-temperature environments
.
2. Unreasonable use of this of products may cause smoke, such as external short circuit, overcharg-
ing, and high ambient temperature. If smoke occurs, please cut off the power in time, use carbon
dioxide or dry powder fire extinguisher for treatment, and bury it with sand or mud. The crowd must
be evacuated in time during the entire process.
3. Unreasonable use of this series of products may cause the single battery to swell. In severe cases,
it may cause the casing to rupture or crack. In these conditions, the battery should be stopped imme-
diately. Please contact our technical department or after-sales service department for further solu-
tion
.
4. It is forbidden to short circuit the positive and negative terminal of the battery directly, and avoid
any metal or other conductive objects contacting the positive and negative terminal of the battery.
This operation may cause personal injury or property damage
.
5. It is forbidden to immerse the battery in water or other conductive liquids. This operation may
cause personal injury or property damage.
