USING THE MENUS
PICTURE
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Standard
0
50
50
50
50
EXIT
MENU
ENTER
Quit
Back
Select
1. Press the TV-MENU button on the remote
controller to display the OSD main menu.
2. Press
/
button to select the PICTURE menu.
3. Press
/
button to select each item.
4. Press the TV-MENU or EXIT button to exit from the menu.
t u
p q
PICTURE SETUP
Picture Mode:
Dynamic, Standard,Mild
User Dynamic, Standard
Mild
User
User
Contrast:
Brightness:
Color:
Sharpness:
Tint:
Select a desired picture mode among
and
.
and
are the factory preset picture mode and the parameter of those modes can not be changed. If
you want to adjust any items (e.g. Contrast, Brightness ,Clour and sharpness etc), please select
, and the settings will be stored in
mode.
You may select the picture mode directly by pressing the PMODE button on the remote control.
Adjust the color brightness of the image.
Adjust the darkness and lightness of the image.
Adjust the saturation level of color.
Adjust the sharpness level of image.
Adjust the tone of color when your system is in NTSC.
C
Color Temperature:
Aspect Ratio
Noise Reduction
Select a optimum color temperature level(Cool/
Standard/Warm) or customize by selecting User.
The level of Red, Green and Blue are can be
adjusted separately in user mode.
:
Select a display mode.
:
If the broadcast signal received is weak, you can select
this function to reduce the video noise if the option set
the “On”.
Color Temperature
Noise Reduction
User
Aspect Ratio
16:9
On
PICTURE
Red
Green
Blue
50
50
50
EXIT
MENU
ENTER
Quit
Back
Select
15
