Sunstech RPBT450, Instruction Manual

Page: 5 / 33

AUXILIARY-IN FUNCTION
HANDS FREE DIALING FUNCTIONS
1.Connect the included Auxiliary cable into the speaker’s Auxiliary port and plug the other end into your
phones auxiliary port.
2.The device will automatically switch to auxiliary mode an alternatively you may manually switch into
auxiliary mode by pressing the input button.
3.Disconnect the Auxiliary cable when finished.
(Note: if there is no sound while auxiliary cable is connected to bluetooth device, ensure all other
bluetooth devices are not paired and repeat step one. If the problem persists replace your cable.)
● Press Pause/Play to answer the call, any music playing will automatically be paused until the call is
ended.
●
Long press Pause/Play to reject the call.
● Press Pause/Play again to end the call when finished. The paused music will resume playing
automatically.
●
Press Pause/Play twice to initiate redial functions.
SPEAKER CONTROLS AND FUNCTIONS
EQUALIZER MODES
●
To pause and play media use the Pause/Play button.
●
To increase the volume press and hold Volume Up button.
● To decrease the volume press and hold Volume Down button.
●
Press the Next Track button to play next track.
●
Press the Last Track button to play the last track.
You can change the equalization of your media by pressing the EQ button on your remote, changing the
dynamic range of the output to suit your media.
●
Pressing the EQ button on the remote allows you to select various Equilizer modes as follows:
Displayed Operation
BASS Bass Mode; Amplifies bass and deepens tones
BLUE Blues; Compliments rich mellow tones
CLAS Classical; Amplifies orchestral acoustics
HALL Hall; Best suited for reggae and dubplates
JAZZ Jazz;best suited for jazz and similar assemblies
POP Pop; Best suited for dominant vocals
NOA Normal; Flat equalization
SOFT Soft; toned down for smooth and vibrant pitch
ROCK Rock; Amplifies the bass and treble
07 08