Sunstech PXR6SBT, Instruction Manual

Page: 7 / 44

14. Mode
：
REC/USB/SD /Bluetooth/FM selection button
15. Next music
16. Pause / Play button
17. Previous music
18. FM ANT
19. Aux in jack
20. R channel
21. L channel
22. DC power jack
INITIAL SET-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit is ready to be
connected to a mains voltage of 5V DC adaptor.
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built in speakers you may wish to connect it to your existing Hi Fi
system. Connect the audio plugs to the Line input on your mixer or amplifier using an RCA cable (not supplied)

Red plug into R/H channel input.

White plug into L/H channel input.
Playing a record

Place the record of your choice on the turntable. If required, do not forget to place the adaptor on the record
spindle.

Choose the desired playing speed using the speed selection switch between 33.3, 45 and 78rpm.

Turn on the Rotary Power Switch; note that this also controls volume.

Release the tone arm lock.

Raise the arm with your hand lightly.

Place the stylus vertically over the first track of the record, the turntable will start turning automatically.
 Put down the stylus slowly on to the record to play.

When a record comes to the end and the tone arm is returned to the tone arm rest, the turntable will stop

automatically if the auto-stop switch is in the ON position. If the switch is in the off position then it will keep
revolving all the time.

Lift up the tone arm and put it on the rest when finished.

Replace the protective cap on the stylus and close the tone arm lock.
 Turn off power at mains.