STAND SPACER
BRACKET
Cut this template out
along the dashed line.
Tape it to the back of the
stand leg with the top of
the template even with
the top of the stand leg.
Drill (4) holes where
shown with a 5/32” drill.
TOP
STEREO SUPPORT
BRACKET
Cut this template out
along the dashed line.
Tape it to the inside of the
right stand leg with the
top of the template even
with the top of the stand
leg. Drill (3) holes where
shown with a 5/32” drill.
TOP
CROSS MEMBER
POWER SUPPL
Y
BRACKET
Cut this template out along the dashed line.
T
ape
it to the back of the lower cross member support
with the right of the template touching the st
and
leg. Be careful to center the template on the
cross member from top to bottom. Drill (4) holes
where shown with a 5/32” drill.
STAND LEG
T
OP
24148-03A
Sheet 2
HOLE DRILLING TEMPLATES
For Optional Stereo Installation Kit
