SWF EMBROIDERY MACHINE
move the lifting slider to adjust its looseness with
the lifting guide.
[Refer to Picture 2-1]
A. Replace the Lifting Guide
①
Use T or L wrench (2mm) to remove the lifting shaft
guide screws from the lifting base.
②
Remove and replace the lifting guide shaft.
B. Assembly
①
Assemble the lifting guide with the lifting slide.
②
Tighten the base plate screws.
[Picture2-1]
2. Set the Lifting Slider and
1) While the base plate fixing screw is lightly tightened,
Replace the Shaft
[Refer to Picture 2-2]
[Picture2-3]
[Picture2-2]
[ Reference ]
[A]
[B]
Caution
) Improperly inserted lifting slider or bent or
broken lifting guide shaft may cause noise during the
sequin work.
Caution
) When you insert the lifting guide shaft into
the lifting base after replacing it, 'A', end of the shaft,
should point to the floor.
A
B
Lifting Base
Lifting Shaft Guide
Fixing Screw
Lifting guide shaft
─ Ver.2009 1st
────────────────────── SunStar Co., Ltd ─
