manualshive.com logo in svg

SunStar SPS/E-BR1202 Series, User Manual

Share
Download
SunStar SPS/E-BR1202 Series User Manual Download Page 23

24

6.6) How to adjust the button clamp holder

tension

Adjust it smoothly to the extent that sewing cloth does not

move during sewing, and fix it with the tension adjusting

nuts - 

①

and 

②

.

6.7) Adjusting the parts of thread release

1) How to Set the Thread release Notch

Place the notch so that the right side of the slot of the

thread release notch touches circumference of the notch

screw, and then fix with a screw.

2) How to Set the Thread Release Stopper

①

Remove the thread release return spring.

②

After unfastening the thread release stopper screw, adjust the trimming drive link and the thread release lever pin

0.3mm apart from each other. Then, attach the arm to the thread delay stopper completely.  When the thread release

stopper is pushed to the right, the space between the trimming drive link and the thread release lever pin is reduced.

And it is enlarged when the stopper is pushed to the left.

③

Hang on the thread release return spring.

①

②

Thread Trimmer 
Cam

Notch

Tightening Screw

0.3mm

Thread Release

Lever Pin

Thread 
Trimming
Driving Link

Thread Release Stopper

Thread release return spring

Screw

Narrow

Widen

The remaining amount of thread may not be enough or not be regular and the thread may be
unfastened from the needle if the notch is not set in the right position.

Caution

For safety, use a tool when removing or attaching the thread release return spring.

Caution

Summary of Contents for SPS/E-BR1202 Series







































Reviews:

No comments

Brands by name

Popular brands

Load more brands