Aug 04
- 14 -
Form 44080000
SPECIFICATIONS
Models
PHS 40 Stainless Steel
PHJ 40 Jet
Maximum Btu /hr Input
40,000
40,000
Orifice size
1.9mm
1.9mm
Gas Type
LP Gas
LP Gas
Supply Inlet gas pressure to regulator:
Maximum
100 psi
100 psi
Minimum
5 psi
5 psi
Manifold Pressure
11” w.c.
11” w.c.
Ignition type
Piezo igniter
Piezo igniter
Heat range
Up to 20ft diameter
Up to 20ft diameter
Weight
64 lb
64 lb
Base Carton dimensions: (W” x D” x H”)
21.5” x 20.5” x 34”
21.5” x 20.5” x 34”
Canopy Carton Dimensions: (W” x D” x H”)
Overall Assembled Height:
89 inches
89 inches
Reflector Diameter
34 inches
34 inches
Fasteners
304 Stainless Steel
Major components material
304 Stainless Steel
Aluminized Steel painted
PLACEMENT OF THE HEATER
Your outdoor patio heater is designed for use as temporary comfort heating for your outdoor patio,
outdoor decks, outdoor spa areas, pool areas, and other outdoor areas with plenty of fresh air.
The heater is NOT designed, approved, or intended for indoor use or enclosed area use such as a
garage, commercial building, tents, ice fishing tents, prefabricated buildings or enclosures or other
enclosed areas.
The heater is also not designed for use on moving objects or vehicles such as houseboats, yachts,
travel trailers, boats, or other moving devices or vehicles.
The minimum clearances from combustibles must be maintained at all times. We recommend the
heater be no closer than 24 inches from any combustible vertical or horizontal wall or have any
combustible material within 24 inches of the top of the reflector.
The heater must always be used on firm, level, and stable ground. Never move the heater while it is in
operation.
WARNING: Never operate heater in an explosive atmosphere and be sure to keep unit away from
where gasoline or other flammable liquids or vapors are stored or used.
