11
Nail
3) Installation of the oil fan
Insert the projecting part of the oil fan
②
into the respective
machine holes on the lower side of the table
①
, and then push
securely to the right. Fix the oil fan to the four fixing spots
③
using 4 nails. (see figure 3)
[Figure 3]
Caution
▶
Be sure to plug in after finishing oil supply, If the user presses on the step by mistake, the
machine will start automatically, and this might lead to physical injuries.
▶
When handling lubricant, use safety goggle or gloves to prevent the lubricant from coming into
contact with the eyes or skin. It can cause inflammation. And don
’
t drink the lubricant. It can
cause vomiting or diarrhea. Please keep it out of the reach from children.
▶
Make sure to supply oil when using it for the first time or after not using it for a long time.
4) Oil supply
A. Checking the oil supply
a) Oil tank check
As can be seen on figure 4, pour the oil into the oil
hole
②
until the oil tank
’
s oil level reaches the red
maximum line
①
. While using the machine,
replenish the oil immediately when the oil level goes
down to the minimum level
③
, back to the red
maximum level
①
. Make sure to check the oil level
once a day.
[Figure 4]
