11
Caution
▶
Plug in only after oil supply is finished. If the operator mistakenly steps on the pedal with
the plug in, the machine will start automatically and can cause severe injuries.
▶
When handling lubricants, wear protective glasses or gloves to avoid contact with your
eyes or skin. Inflammation may be caused otherwise. Never drink lubricants since they
can cause vomiting or diarrhea. Keep out of the reach of children.
▶
Operate the machine only after adding oil when the machine is being used for the first time
or has been left unused for a long time.
[Fig. 3]
(1) Installation
A. Attach the resistance box around the motor under the
table.
B. Connect the connector from the solenoid to the resistance
box as shown in Fig. 3, and then connect the line from
the resistance box to the control box.
3) Resistance box for knee-lifting solenoid (KM- -7N)
4) Lubrication
(1) Installing Magnetic Chip Remover
A. Attach the magnetic chip remover that is in the
accessory box to the oil pump inside the bed.
(See Fig. 4)
※
Do not use the magnet for other purposes. Use of the
sewing machine without the magnet may cause
malfunction and has a bearing on the machine
’
s
durability.
[Fig.4]
Magnet
Oil pump
Automatic knee-lifting solenoid
Resistance box
Control box
Keystone Sewing Machine Company, Inc.
