深圳市跃科达科技有限公司
Shenzhen SUNSKY Technology Limited
9--18
（
or close
）
VOR function
，
when recording
，
all voices source are weak
，
unit will pause recording “
”sign
glitter, when voice source recover normal voice, unit will continue record “
”sign stop glittering.
5.4 Check residual memory
：
Before recording, you can check residual memory for recording, when stand by, press
【 】
key setting
menu
，
following as below picture
：
：
indicate residual 120 MB for recording
；
：
indicate checking.
Notice
：
please refer to attached page “specification parameter” for checking residual memory,
and calculate residual memory depend on current recording quality.
** when recording, residual memory display 0 MB, LCD display “DIS/FULL”
，
indicate memory is
not enough for recording, please save current recording document automatically, following as
picture
：
5.5 External microphone recording.
Please insert attached external microphone into
【
MIC
】
jack, when stand by, select A,B,C folder
，
long
press
（
two seconds
）【
REC/STOP
】
key to begin recording; Recording way same built-in microphone
recording.
5.6 Line-in recording.
Please insert matched one plug of transfer line into
【
MIC
】
jack, other plug insert into external input jack,
when stand by, select A,B,C folder
，
long press
（
2 seconds
）【
REC/STOP
】
key to begin recording,
recording way same built-in microphone recording.
** please adjust external output signal degree before recording in order to get good recording
quality.
5.7 Telephone recording
Firstly, connect attached telephone input line(or telephone receiver line) with telephone unit and
adapter, insert one plug of transfer line into adapter, and other one plug insert into
【
MIC
】
jack of