Troubleshooting
If the device does not turn on:
1. Make sure the plug is firmly inserted into the electrical outlet.
2. Make sure the device has been operating within the limits indicated
in this instructional manual (30 minutes ON/30 minutes OFF).
If the device does not nebulize, or the nebulization
is weak:
1. Make sure the ends of the air tube are fitted tightly onto the main
unit and onto the nebulizer (see connected kit and unit diagram
below)
2. Check whether the nebulizer mask or mouthpiece kit cup chamber is
empty or overfilled with medication.
3. Check whether the nebulizer nozzle is obstructed (see
medicine cup diagram below)
4. Check whether the baffle is inserted properly. The baffle fits over the
medcine cup’s interior cone (see medicine cup diagram below).
Exploded view
Medicine cup
Connected kit and unit
Baffle
Nozzle
Fit tube ends tightly
Closed view
Instructions for Use with T-Piece Kit
Examine the unit before the first use in order to check
for possible shipping damage. When taking a treatment sit
upright and relaxed.
1. After unpacking the device, check the compressor and accessories
for visible damage or defects such as cracks in the plastic housing,
which could expose electrical components. Contact your retailer to
report any damaged product.
2. Before using the device, follow the cleaning instructions as detailed
in this user manual.
3. Attach the supply tube to the compressor and to the bottom of the
nebulizer cup.
4. Open the nebulizer cup by pushing down on the cap and
twisting counter-clockwise.
5. Add prescribed medication into nebulizer cup then turn top on
until secure.
6. Attach T-piece to the nebulizer bottle.
7. Attach mouthpiece and corrugated tube to T-piece.
8. Connect the 7ft tube to the nebulizer bottle and the
nebulizer machine.
9. Ensure connections are secure before turning on the
nebulizer machine.
10. Plug the compressor into the electrical outlet, making sure the
electrical rating shown on the rating plate on the bottom of the unit
corresponds to your main voltage.
11. To start treatment, switch the compressor on by pressing the
ON/OFF switch onto the “I” position.
ATTENTION: This device rated for intermittent use
30 minutes ON / 30 minutes OFF.
12. When mist is visible, begin inhaling with the mouthpiece.
13. When the treatment has been completed, switch the unit OFF by
setting the switch position to “O” and disconnect the plug from the
electrical outlet.
14. Wash the nebulizer and accessories as described in the
cleaning section.
