background image

 

SIM800 Series_Multiplexer_Application Note_V1.04 

www.simcom.com      

                                                               

2 / 25                          

 

 

 

Document Title: 

SIM800 Series_Multiplexer_Application Note   

Version: 

1.04 

Date: 

2020.06.15 

Status: 

Released 

 

 

GENERAL NOTES 

 

SIMCOM OFFERS THIS INFORMATION AS A SERVICE TO ITS CUSTOMERS, TO SUPPORT 

APPLICATION AND ENGINEERING EFFORTS THAT USE THE PRODUCTS DESIGNED BY SIMCOM. 

THE INFORMATION PROVIDED IS BASED UPON REQUIREMENTS SPECIFICALLY PROVIDED TO 

SIMCOM BY THE CUSTOMERS. SIMCOM HAS NOT UNDERTAKEN ANY INDEPENDENT SEARCH 

FOR ADDITIONAL RELEVANT INFORMATION, INCLUDING ANY INFORMATION THAT MAY BE IN THE 

CUSTOMER’S POSSESSION. FURTHERMORE, SYSTEM VALIDATION OF THIS PRODUCT 

DESIGNED BY SIMCOM WITHIN A LARGER ELECTRONIC SYSTEM REMAINS THE RESPONSIBILITY 

OF THE CUSTOMER OR THE CUSTOMER’S SYSTEM INTEGRATOR. ALL SPECIFICATIONS 

SUPPLIED HEREIN ARE SUBJECT TO CHANGE. 

 

 

COPYRIGHT 
 

THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION WHICH IS THE PROPERTY 

OF SIMCOM WIRELESS SOLUTIONS LIMITED COPYING, TO OTHERS AND USING THIS DOCUMENT, 

ARE FORBIDDEN WITHOUT EXPRESS AUTHORITY BY SIMCOM. OFFENDERS ARE LIABLE TO THE 

PAYMENT OF INDEMNIFICATIONS. ALL RIGHTS RESERVED    BY SIMCOM IN THE PROPRIETARY 

TECHNICAL INFORMATION 

INCLUDING BUT NOT LIMITED TO REGISTRATION GRANTING OF A 

PATENT , A UTILITY MODEL OR DESIGN. ALL SPECIFICATION SUPPLIED HEREIN ARE SUBJECT TO 

CHANGE WITHOUT NOTICE AT ANY TIME. 

 

 

SIMCom Wireless Solutions Limited

 

Building B, SIM Technology Building, No.633 Jinzhong Road, Changning District, Shanghai P.R. China 

Tel: +86 21 31575100 

Email: 

[email protected]

 

 

For more information, please visit:

 

https://www.simcom.com/download/list-863-en.html

 

 

For technical support, or to report documentation errors, please visit:

 

https://www.simcom.com/ask/ or email to: 

[email protected]

 

 

 

Copyright © 2020 SIMCom Wireless Solutions Limited All Rights Reserved.

 

 

Summary of Contents for SIMCom SIM800 Series


























Reviews: