Sunrise telecom XTT 5000, User Manual, Page: 66 / 181

XTT 5000 User's Manual
Stream Payload Setup Home
Press 'Payload' on the Stream Table or Pattern on the Signal tab configure the test
payload elements. See Auto Fill to configure multiple streams.
Parameter Options Details
Sunrise Tag
Read the notes .
None, SN/TS, STAG Enable useful proprietary
tagging, or not.
Tag: SN/TS On, Off Sequence Time
Stamp; select for compatibility
with STT Ethernet.
The SN/TS tags include a
sequence number and a time
stamp; enable both of these
fields on the XTT Ethernet.
Tag: STAG On, Off Sequence Time
Stamp + Sunrise Tag 5 bytes
(Reserved).
Select for maximum usefulness
of proprietary tagging.
Invert On, Off The selected test pattern will
be transmitted inverted.
Pattern Type 2^31, 2^23, 2^20,
2^15, 1111, 1010,
0000. User, User
1024*
Select a test pattern to perform
a BERT with.
Not all patterns are available
for all configurations.
(User) Pattern
Data 1-32 Enter the four-byte test pattern
in hexadecimal format with the
number pad.
• Edit each line directly.
• Use the 'Next/Previous
Patterns' button to access
the next screen of patterns.
User Pattern
Type DATA
DEC
:The payload is
filled with
decremental bytes.
INC : The payload is
filled with
incremental bytes:
00 01 02 03…
Define how a User pattern will
fill the payload.
After selecting User as the
Pattern Type, tap 'Pattern Data'
and use the keypad which pops
up to enter the test pattern.
'Apply to All Streams'
button
Apply the Tag, Type, and Pattern selections to all of the
streams in the table.
Press to apply the new settings and close the window.
Where do you want to go next?
Throughput Stream Table Setup
Throughput Summary Results
60