Sunrise telecom XTT 5000, User Manual

Page: 122 / 181

XTT 5000 User's Manual
IP Summary Results Home
The top left of the window displays test status:
Elapsed Time : How long the test has been running.
Remaining Time : How long remains in the scheduled test, or Continuous.
Banner : A message summary banner of the status of the test. It reports any errors
or alarms, along with a date and time stamp.
Below the banner, view a list of logged
events : received errors and/or alarms, e.g.
Lost Frame, including a count of the number of errors, with a resolution of one
second.
The right side of the window shows more specific results.
Status
Even though the test set generates pings, there are circumstances which cause the
pings not to be sent. For example, the port could lose link or be paused, preventing
the transmission of the Ethernet frames in which the ping packets reside. In these
situations, the number of pings sent will not be displayed to avoid confusion.
Parameter Details
TX
Utilization
Transmitted bandwidth as a percentage of maximum traffic rate
(minimum frame gap)
TX Line
Rate
Transmitted bit rate (in kbps, bps, etc.) of the Ethernet frames,
ignoring the frame gap, preamble, and SAD. The data rate is
always less than the line rate.
TX Data
Rate
Transmit data rate (in kbps, bps, etc.). This includes the frame
headers but not the IPG or Preamble. Thus, the data rate
reflects both the frame rate and frame size.
RX
Utilization
Received bandwidth as a percentage of maximum traffic rate
(minimum frame gap).
RX Line
Rate
Received bit rate, based on the current utilization (in kbps, bps,
etc.).
RX Data
Rate Received bit rate of the Ethernet frames, ignoring the frame
gap, preamble, and SAD. The data rate is always less than the
line rate (in kbps, bps, etc.).
Press on the Action Bar to start a test.
Where do you want to go next?
Ping Trace Route Result s
Ping Test Results
IP Test Setup
IP Testing
Throughput Test Setup
RFC2544 Applications
Home
116