Sunrise System SRS 100, Manual, Page: 4 / 15

few seconds and Snooze is de-activated. Please Note: To switch off the lamp after a sunrise press
(-) NEGATIVE button until lamp is dimmed.
Setting Up the Sunrise System
The first time the Sunrise System dawn simulator is switched on, the LCD display will flash ON
and OFF; the time shown will be 1:00pm or 13:00, indicating that the time is unreliable.The LCD
text will display SUNRISE. Please Note: When altering the settings ensure the ALARM symbol is
not visible.The unit will come out of SETUP MODE automatically if no button is pressed for 12
seconds or if you press the SNOOZE button.
Setting the Language
Press the SET button, the display will show SET LANGUAGE for 2 seconds, then it will show
ENGLISH. You can change the language by using the (-) NEGATIVE and (+) POSITIVE buttons to
select the language of your choice. Please Note: This setting only appears as the first menu item when
you plug the Sunrise System in for the first time, or when reset. At any other time the language can still
be changed but the option will be the last menu item. Press Set to continue.
Setting the Time
Press the SET button, the display will show CLOCK SET. You can now adjust the time by using the
(-) NEGATIVE and (+) POSITIVE buttons. If you press and hold the negative or positive button
the time will fast reverse or fast forward.The clock will start when you next press SET to adjust
the next setting or press SNOOZE to go out of SETUP MODE. Press SET to continue.
Setting the Alarm Time
Press the SET button repeatedly until the display shows ALARM SET, after two seconds the display
will show SUNDAY. You can now adjust the Sunday alarm time by using the (-) NEGATIVE or (+)
POSITIVE button. Once the Sunday alarm time is set press the SET button again and repeat the
action for the other days of the week. Press SET to continue.
Setting the 12/24 Hour Time
Press the SET button repeatedly until the display shows 12/24 HOUR. By pressing the (-)
NEGATIVE or (+) POSITIVE button the user can choose between a 12 or 24 hour clock.
The earlier set alarm times will automatically adjust accordingly. Press SET to continue.
Setting the Security Mode
Press the SET button repeatedly until the display shows SECURITY OFF or SECURITY ON. When
you select ON a House icon will show on the display to remind you that this feature is activated.
Press the (-) NEGATIVE or (+) POSITIVE button to switch between On or Off. When you select
SECURITY ON mode the unit will switch the lamp on and off at random times between 19:00
(7:00pm) and 09:00 (09:00am) in the morning.The SECURITY MODE will light your home at
random times to give the impression to unwanted ‘visitors’ that the home is occupied.
Press SET to continue.
Setting the Speaker
Press the Set button repeatedly until the display shows SPEAKER ON or SPEAKER OFF.
This setting allows the user to activate or de-activate the speaker. Press the (-) NEGATIVE or (+)
POSITIVE button to switch between SPEAKER ON and SPEAKER OFF. When the speaker is de-
activated and the alarm is set, the unit will only perform a sunrise (fade up of the lamp). When the
speaker is activated and the alarm is set, the unit will perform a sunrise and the sounder will buzz
when the alarm time is reached. After a while some users will be able to wake up with the sunrise
7 6
only and they might wish to switch the speaker off. Press Set to continue.
Setting the Sunrise Time
Press the Set button repeatedly until the display shows SUNRISE 15. The Sunrise time is the
length of time it will take for the lamp to fade up from OFF to maximum brightness.The maxi-
mum brightness of the lamp will coincide with the Alarm time.Therefore, if the Sunrise time is set
to 15 minutes and the Alarm time is set for 07:00 the lamp will start Fading Up at 06:45.The lamp
will get to full brightness after 15 minutes. When the speaker is set to ON, the sounder will start
when the lamp is at maximum (07:00 in the example above).The Sunrise time can be set to
various times:- 15, 30, 45, 60 or 90 minutes by pressing the (-) NEGATIVE or (+) POSITIVE
button. Press Set to continue.
Setting the Sunset Time
Press the Set button repeatedly until the display shows SUNSET 15.The Sunset time is the length
of time it will take to fade the lamp down from maximum brightness to fully off. Sunset is initiated
when the Alarm is activated and the lamp is on. If the lamp is already off then the Sunset will not
occur. The Sunset time can be set to various times:- 15, 30, 45, 60 or 90 minutes by pressing the
(-) NEGATIVE or (+) POSITIVE button. Press Set to continue.
Setting the Back Light Mode
Press the Set button repeatedly until the display shows BACKLITE OFF, BACKLIGHT ON or
BACKLIGHT AUTO.The LCD Backlight has three settings which can be chosen by pressing the
(-) NEGATIVE or (+) POSITIVE button. BACKLITE OFF leaves the LCD backlight on a constant
very low backlight level. BACKLIGHT ON turns the LCD backlight always on. BACKLITEAUTO
turns the LCD backlight on low or full relative to the brightness of the bedside lamp and relative
to the time of day. E.g: In this mode the LCD backlight will be on full when the bedside lamp level
is higher than 25% at any time of the day and the LCD backlight will also be on full between
10:00 and 18:00 regardless of the lamp level of the bedside lamp. Press Set to continue.
Setting the Night Light Mode
When this feature is enabled the Sunrise System controls your lamp to fade to a low light level,
when the alarm is activated, rather than completely out. Suitable for use as a child’s night light.
Press the Set button repeatedly until the display shows NITELIGHTOFF or NITELIGHT ON.
The feature can be switched on or off by pressing the (-) NEGATIVE or (+) POSITIVE button.
Press Set to continue.
Setting the Weekday
Press the Set button repeatedly until the display shows SUNDAY (or any other day of the week).
Although this is not a displayable parameter the clock has a 7 day alarm, therefore it is necessary
t o keep track of the correct day of week.The day can be changed by pressing the (-) NEGATIVE
or (+) POSITIVE button. Press Set to continue.
Setting the Year
Press the Set button repeatedly until the display shows YEAR 2000.The clock also keeps the
correct date including leap year calculation and can display it, as described below.The year can be
adjusted between 2000 and 2099 by pressing the (-) NEGATIVE or (+) POSITIVE button.
Press Set to continue.
Setting the Month
Press the Set button repeatedly until the display shows JANUARY. You can adjust the month by