Sunrise spas Essense 250E, Owner'S Manual

Page: 5 / 153

European Sunrise Spas 2018 Paragon Collection Owner’s Manual
DOC: OM-PARAGON-18E
5
CONDITIONS OF WARRANTY
AND CONSUMER OBLIGATIONS
As a new spa owner, you have specific obligations in regards to the installation and safe use of this spa. Failure to do
so may result in a loss of warranty coverage not to mention personal injury to those using this spa.
Inspect the spa upon its arrival for damage. If you are being made aware of this for the first time, your
spa may not have been delivered in its original factory packaging. If this is the case, please take time to
inspect your spa and report any damage or missing items to your dealer.
1) Install the spa both physically and electrically, in accordance with any local codes.
2) Provide suitable access to all sides of the spa. Any custom built enclosure, either above or below a deck
surface, must be able to be removed with relative ease.
3) Provide sufficient work area around the spa’s perimeter especially the side the spa’s equipment is located on.
4) Regularly check operation of the spa in regard to filtration, jet pump operation and the heating system.
5) Report any concern to the dealer. Any problem that arises towards the end of particular warranty coverage
should be documented and reported to the dealer
6) Maintain the water’s chemical balance and clean/replace the system’s cartridge filter(s) as instructed by the
dealer and/or Leisure Manufacturing Inc.
7) Drain and refill the spa on a regular basis as instructed by the dealer and/or Leisure Manufacturing Inc.
8) Winterize and store the spa and its’ components in accordance with the manufacturer’s printed instructions.
9) Care for and maintain the spa cabinet, hard cover and acrylic surface as outlined in these instructions.
10) Ask your dealer to record the spa’s serial number on your bill of sale.
11) Provide a copy of your bill of sale, if requested by the dealer or Leisure Manufacturing Inc.