A.BATTERY REMOVAL
To remove the batteries for transporting or servicing:
A
Remove Batteries
a. Pull and unlock tabs (A) on both sides of the door panel (b).
b. Drop door panel (b).
c. Carefully pull battery pack until cable connection is accessible(c).
d. Disconnect to remove the batteries.
e. Lift the battery from the compartment using the battery carrying
straps.
f. Repeat operation in reversed steps to put the batteries back in.
WARNING
Batteries may weigh up to 55 lbs. (25 kg). Care must be taken to
avoid injury when lifting.
B. SWING-AWAY FOOTRESTS
1. Installation
a. Place swing-away pivot pin (d) into the locating hole on top of the
hanger mount with the footrest facing outward from frame.
Rotate the footrest inward until latch plate locks (e) into place on lock-
ing bolt..
2. Removal
a. To remove footrest, press quick-release lever (e).
b. Rotate footrest outward and lift.
3. Height Adjustment
a. Remove both bolts (f) in the hanger frame tube.
b. Reposition the footrest.
c. Re-tighten all bolts (f).
c
e
Quickie
X2
Owner’s
Manual Rev.
A
14.
VIII. SET-UP, ADJUSTAMENT AND USE
d
f
a
b
a
