Q7ME DEPTH ADJUSTMENT
TILT & LIFT-TILT COMBO
Sunrise Medical 2842 N. Business Park Ave Fresno, CA 93727 USA In Canada (800) 263-3390
© 2020 Sunrise Medical (US) LLC
11/2020 P/N 248019 Rev. B
Pg 3 of 3
Customer service: +1 (800) 333-4000
or visit www.SunriseMedical.com
2
D. DEPTH ADJUSTMENT COMPONENTS
1.
Note desired depth on chart, Figure 2.
2. Using the 5mm hex key remove the 4 bolts on the top of the
seat pan and reposition to proper holes indicated on the chart.
3. Once front position is made the back holes will line up to the
proper position.
E. DECAL ALIGNMENT
1. After adjustments are made ensure that the arrow on decal 2
lines up to the proper seat depth on corresponding decal 1,
Fig 3 & 3A.
WARNING
Check decal and frame depth locations, Figure 3 & 3A. They should
BOTH line up to the same seat depth position. If they do not, make
necessary adjustments and/or contact Sunrise Medical Technical
Support 800-333-4000.
F. FINAL ADJUSTMENTS
1.
Once all alignments are confirmed ensure that all bolts are
torqued to 10-11 ft-lbs (13.6-14.9Nm).
3
Location 2
on top of
side frame
(both sides)
Location 1 on
top of seat pan
EXAMPLE:
For 16” set
depth with
combo
module and
seat frame B:
Seat position
7. Combo
D-4 - 4 on
the seat will
line up to ‘D’
on the seat
adapter.
Seat
adapter
Seat frame
‘B’ adapter
Seat frame
‘A’ adapter
Module
Seat
Seat
Depth
Seat
Position
Tilt
Combo
Frame A
Combo
Frame B
15”
4
E-4
E-4
E-4
16”
7
D-4
D-4
D-4
17”
9
D-4
C-4
E-7
18”
12
E-7
D-7
D-7
19”
14
D-7
C-7
C-7
20”
17
C-7
A-7
A-7
3A
Example shown is for 16’ seat depth with combo module and seat frame B
Location 1
set to seat
position 7
Location 2
set to seat
position 7
Right hand adapters shown
