background image

7.3

 Electric Seating function

The Quickie Q700 M has an electric seating function. This 

function is the seat position to which all the Memory seat 

positions described above come back to by pulling the 

Joystick into the backward direction when in the seating 

memory mode.

DANGER!

When the s

upine

 function is used, the 

center

 of gravity is 

moved away from the original safe position into a raised or 

retracted position. This can increase the likelihood of tipping 

over.  So only use this seat function on a level floor and drive 

in the lowest speed. Not doing so could lead to personal 

injury.

7.4

 Seat Memory Position

The control system on the Q700 M has 

up to 6

 

predefined seat memory positions. Each 

ordered 

memory location has a set of factory seat positioning 

presets:

1.

Seated

2.

Supine

3.

Pressure 

R

elief

4.

Feet 

A

bove 

H

eart

5.

Transfer

6. C-ME

®

The Seat actuators are all

 

working with a feedback system to

track their positions and

 

movements.

This is important:

a.

to reach the required memory position.

b.

to prevent mechanical clashes of the seat.

c.

to operate the actuators especially towards the memory

positions in an ergonomic, smooth and safe way.

All ordered

 

m

emory positions, if not suitable for the user, 

can be changed and customized to the needs required.

The software takes into account the range of the 

available mechanical movements and also all safety 

aspects.

Q700 M Ergo Seat

23

247554 Rev. A

Summary of Contents for Quickie Q700 M SEDEO ERGO

































Reviews: