Sunrise Medical F16, Owner'S Manual

Page: 42 / 52

37 SUNRISE F16 Issue 8
Transporting your chair
Disassembly
Your F16 can be disassembled for
transporting, this is performed in
the opposite method of assembly
and should be done in the following
sequence:
1 Remove the footrests
(see page 10).
2 Remove the control pod by
loosening the locking lever
(see page 10) and sliding the
assembly out of the sleeve.
3 Remove the motor/battery unit
by pulling the release cord
(Fig. 41) and holding the frame
and rolling the frame away from
the power unit. Allow the power
unit to slowly rock back on to the
stabiliser wheels.
Note: Do not stand too close to
the power unit when the motor
unit rocks back.
4 Fold the frame by standing to
one side and pulling the side
rails together. This may now be
stowed.
5 Disconnect the control pod from
the power unit by unplugging the
control cable from the control
box (Fig. 42).
N.B. never pull the plug using the
cable, always grip the plug body.
6 You may now stow or transport
the wheelchair.
If you wish to complete the
disassembly follow the next
instructions.
7 Disconnect both battery plugs
(Fig 42).
8 Slide out both batteries.
Release
cord
Fig. 41
Fig. 42
Control box plug
(behind plate)
Power lead